FRIE=FRIE_0, FWDE=FWDE_0, FWF=FWF_0, FRF=FRF_0, SR=SR_0, FR=FR_0, BCE=BCE_0, DBGE=DBGE_0, FRDE=FRDE_0, WSF=WSF_0, STOPE=STOPE_0, SEF=SEF_0, FWIE=FWIE_0, SEIE=SEIE_0, FEIE=FEIE_0, WSIE=WSIE_0, TE=TE_0, FEF=FEF_0
SAI Transmit Control Register
| FRDE | FIFO Request DMA Enable 0 (FRDE_0): Disables the DMA request. 1 (FRDE_1): Enables the DMA request. |
| FWDE | FIFO Warning DMA Enable 0 (FWDE_0): Disables the DMA request. 1 (FWDE_1): Enables the DMA request. |
| FRIE | FIFO Request Interrupt Enable 0 (FRIE_0): Disables the interrupt. 1 (FRIE_1): Enables the interrupt. |
| FWIE | FIFO Warning Interrupt Enable 0 (FWIE_0): Disables the interrupt. 1 (FWIE_1): Enables the interrupt. |
| FEIE | FIFO Error Interrupt Enable 0 (FEIE_0): Disables the interrupt. 1 (FEIE_1): Enables the interrupt. |
| SEIE | Sync Error Interrupt Enable 0 (SEIE_0): Disables interrupt. 1 (SEIE_1): Enables interrupt. |
| WSIE | Word Start Interrupt Enable 0 (WSIE_0): Disables interrupt. 1 (WSIE_1): Enables interrupt. |
| FRF | FIFO Request Flag 0 (FRF_0): Transmit FIFO watermark has not been reached. 1 (FRF_1): Transmit FIFO watermark has been reached. |
| FWF | FIFO Warning Flag 0 (FWF_0): No enabled transmit FIFO is empty. 1 (FWF_1): Enabled transmit FIFO is empty. |
| FEF | FIFO Error Flag 0 (FEF_0): Transmit underrun not detected. 1 (FEF_1): Transmit underrun detected. |
| SEF | Sync Error Flag 0 (SEF_0): Sync error not detected. 1 (SEF_1): Frame sync error detected. |
| WSF | Word Start Flag 0 (WSF_0): Start of word not detected. 1 (WSF_1): Start of word detected. |
| SR | Software Reset 0 (SR_0): No effect. 1 (SR_1): Software reset. |
| FR | FIFO Reset 0 (FR_0): No effect. 1 (FR_1): FIFO reset. |
| BCE | Bit Clock Enable 0 (BCE_0): Transmit bit clock is disabled. 1 (BCE_1): Transmit bit clock is enabled. |
| DBGE | Debug Enable 0 (DBGE_0): Transmitter is disabled in Debug mode, after completing the current frame. 1 (DBGE_1): Transmitter is enabled in Debug mode. |
| STOPE | Stop Enable 0 (STOPE_0): Transmitter disabled in Stop mode. 1 (STOPE_1): Transmitter enabled in Stop mode. |
| TE | Transmitter Enable 0 (TE_0): Transmitter is disabled. 1 (TE_1): Transmitter is enabled, or transmitter has been disabled and has not yet reached end of frame. |